ORIGINAL HITEK / PRODUCT DETAILS
Ceramic Plus · Dyed Technology (NEW)
A dyed ceramic film with a deep, consistent appearance.
- Technology
- Dyed Technology
- Thickness
- 2 mil
90% IR
Listed across the published shade table.
99% UV
Listed across the published shade table.
2 mil
Two ply dyed ceramic construction.
By shade
Compare VLT and TSER in the table below.
01 The installed look
See the finish in place.
A clean black appearance from the dyed ceramic construction.
HITEK Ceramic Plus Dyed
Black dyed ceramic
- Appearance
- A clean black appearance from the dyed ceramic construction.
- Installed on
- Automotive glass
- Before you choose
- Use the Dyed Technology table and matching product variation.
Illustrative finish preview. Actual appearance varies with the selected product, shade, surface and lighting. Confirm with a physical sample.
02 The product
More comfort. A deep dyed finish.
Ceramic Plus Dyed uses a two-ply, 2 mil construction. Its published shade table lists 90% infrared rejection and 99% UV rejection, with total solar energy rejection varying by shade. Compare the full measurements for the shade you choose.
03 Performance & construction
Compare the performance.
The numbers behind your next recommendation.
SHADE BY SHADE
Ceramic Plus Dyed performance
Compare every published shade, or select one to see its measurements.
| Shade | Measured VLT | TSER | IR rejection | UV rejection | Glare reduction | Shading coefficient |
|---|---|---|---|---|---|---|
| 5% | 6% | 69% | 90% | 99% | 93% | 0.34 |
| 20% | 20% | 65% | 90% | 99% | 78% | 0.40 |
| 35% | 36% | 60% | 90% | 99% | 60% | 0.46 |
| 50% | 50% | 56% | 90% | 99% | 45% | 0.51 |
VLT · visible light transmittedTSER · total solar energy rejectedShade names and measured VLT may differ.
IR test wavelength is not stated. Shading coefficient comes from HITEK’s product table. Ceramic Plus Carbon and Dyed have separate constructions and performance tables. Compare films under equivalent test conditions.
HITEK specification source
Open the original HITEK chart ↗ · Checked October 20, 2026.
Technology
Dyed Technology
A dyed ceramic film with a deep, consistent appearance.
Product specifications
| Technology | Dyed Technology |
|---|---|
| Construction | 2 ply |
| Thickness | 2 mil |
04 Applications
The right fit. A considered install.
Professional application guidance
Application guidance
Select the film and shade for the vehicle, glass and applicable tint requirements. Confirm current roll sizes and availability in the HITEK dealer store. Follow the product’s installation and care guidance.
05 Questions, answered
Before you choose.
What will Ceramic Plus Dyed look like after installation?+
A clean black appearance from the dyed ceramic construction. Use the Dyed Technology table and matching product variation.
Does darker tint always reject more heat?+
Shade and heat performance are different properties. Compare the published performance for the exact film and shade. Visible light transmission describes brightness; it does not measure total heat rejection.
What warranty information should I check?+
Lifetime. Automotive program preview: final policy wording and effective date are pending. Your issued warranty governs your installation; this preview does not change existing coverage.
How do I get Ceramic Plus Dyed installed?+
Use Find an Installer to request help for your project. Ask your installer to confirm the selected product, finish, application suitability and warranty before installation.
06 Explore the range
Find your next option.
AutomotiveCeramic Plus · Carbon Technology
Carbon meets ceramic.
AutomotiveStandard Black
Clean looks. Everyday value.
AutomotiveClassic Black
The everyday classic. Built to last.
