
ORIGINAL HITEK / PRODUCT DETAILS
Ceramic IR
A neutral ceramic finish with a dedicated infrared-rejection coating.
- Technology
- Carbon-based nano-ceramic with IR rejection coating
- Appearance
- Neutral
Available shades
2%5%15%20%30%35%40%50%70%75% IR
At 5% VLT over 740–2500 nm.
Nano ceramic
Carbon based film with an IR rejection coating.
Neutral tone
Clean appearance and moderate tack adhesive.
Lifetime
Automotive program preview. See warranty details.
01 The installed look
See the finish in place.

A neutral glass tone suited to a clean automotive tint installation.
HITEK Ceramic IR
Neutral ceramic finish
- Appearance
- A neutral glass tone suited to a clean automotive tint installation.
- Installed on
- Automotive glass
- Before you choose
- Use the shade-specific performance information when choosing your film.
Illustrative finish preview. Actual appearance varies with the selected product, shade, surface and lighting. Confirm with a physical sample.
02 The product
Ceramic comfort for every drive.
Ceramic IR pairs carbon-based nano ceramic technology with a neutral tone. Published infrared rejection is 75% at 5% VLT across 740–2500 nm. A moderate-tack adhesive supports professional installation.
03 Performance & construction
Compare the performance.
The numbers behind your next recommendation.
SHADE BY SHADE
Ceramic IR performance
Compare every published shade, or select one to see its measurements.
| Shade | Measured VLT | TSER | IR rejection | Glare reduction | UV rejection |
|---|---|---|---|---|---|
| 5% | 5% | 65% | 75% | 95% | 99% |
| 15% | 15% | 60% | 73% | 83% | 99% |
| 20% | 19% | 55% | 72% | 77% | 99% |
| 35% | 36% | 50% | 75% | 58% | 99% |
| 40% | 39% | 47% | 73% | 55% | 99% |
| 50% | 51% | 43% | 70% | 42% | 99% |
| 70% | 68% | 35% | 73% | 41% | 99% |
VLT · visible light transmittedTSER · total solar energy rejectedShade names and measured VLT may differ.
The product description specifies 740–2500 nm for IR rejection at the 5% shade. The chart does not state separate test conditions for the remaining shades. Compare films under equivalent test conditions.
No chart measurements are published for 2%, 30%. Confirm specifications and availability with HITEK.
HITEK specification source
Open the original HITEK chart ↗ · Checked October 20, 2026.

Technology
Carbon-based nano-ceramic with IR rejection coating
A neutral ceramic finish with a dedicated infrared-rejection coating.
Product specifications
| Technology | Carbon-based nano-ceramic with IR rejection coating |
|---|---|
| Appearance | Neutral |
| IR rejection | 75% over 740–2500 nm at 5% shade |
IR rejection measured at a single wavelength is not the same as total solar energy rejection. Use the shade specific chart when comparing films.
04 Applications
The right fit. A considered install.
Professional application guidance
Application guidance
Select the film and shade for the vehicle, glass and applicable tint requirements. Confirm current roll sizes and availability in the HITEK dealer store. Follow the product’s installation and care guidance.
05 Questions, answered
Before you choose.
What will Ceramic IR look like after installation?+
A neutral glass tone suited to a clean automotive tint installation. Use the shade-specific performance information when choosing your film.
Does darker tint always reject more heat?+
Shade and heat performance are different properties. Compare the published performance for the exact film and shade. Visible light transmission describes brightness; it does not measure total heat rejection.
What warranty information should I check?+
Lifetime. Automotive program preview: final policy wording and effective date are pending. Your issued warranty governs your installation; this preview does not change existing coverage.
How do I get Ceramic IR installed?+
Use Find an Installer to request help for your project. Ask your installer to confirm the selected product, finish, application suitability and warranty before installation.
